Initial Configuration On Nfx350 Devices; Factory Default Settings - Juniper NFX350 Hardware Manual

Ensure that you have the following parts and tools available:
1 mini-USB cable with Standard-A and Mini-USB Type- B (5-pin) connectors (not provided).
To connect the NFX350 device to the console using Mini-USB Type-B console port:
1. Connect the Standard-A connector of the mini-USB cable to the host machine (PC or Laptop).
2. Connect the Mini-USB Type-B (5-pin) connector of the mini-USB cable to the Mini-USB Type-B console
port (labeled CON) on the NFX350 device.
3. Set the Mini-USB Type-B console port as the active console port by using the command port-type.
4. Reboot the NFX350 device.
After the connection is established, the Mini-USB Type-B becomes the active console port. The host
machine connected to the Mini-USB Type-B console port displays log messages and lets you control
NFX350 device functionality through it.

Initial Configuration on NFX350 Devices

IN THIS SECTION

Factory Default Settings | 83

Enabling Basic Connectivity | 84
Establishing the Connection | 86
Factory Default Settings
The NFX350 is shipped with the following factory default settings:
Table 35: Security Policies
Source Zone
trust
Destination Zone
trust
Policy Action
permit
83