Sfp+ Direct Attach Cables For Nfx350 Devices - Juniper NFX350 Hardware Manual

NOTE: We recommend that you use only optical transceivers and optical connectors purchased
from Juniper Networks with your Juniper Networks device.
CAUTION:
third-party optic or cable, the Juniper Networks Technical Assistance Center (JTAC)
can help you diagnose the source of the problem. Your JTAC engineer might recommend
that you check the third-party optic or cable and potentially replace it with an equivalent
Juniper Networks optic or cable that is qualified for the device.
For the list of supported transceivers and its specifications, see the
SEE ALSO
NFX350 Chassis | 24

SFP+ Direct Attach Cables for NFX350 Devices

IN THIS SECTION
Cable Specifications | 52
Standards Supported by DAC Cables | 52
Small form-factor pluggable plus transceiver (SFP+) direct attach copper (DAC) cables, also known as
Twinax cables, are suitable for in-rack connections between servers and devices. They are suitable for
short distances of up to 23 ft (7 m), making them ideal for highly cost-effective networking connectivity
within a rack and between adjacent racks.
This topic describes:
If you face a problem running a Juniper Networks device that uses a
Hardware Compatibility Tool.
51