Maintaining Fiber-Optic Cables On The Nfx350; Maintaining Fiber-Optic Cables In An Nfx350 Device - Juniper NFX350 Hardware Manual

CAUTION:
not touch the connector pins at the end of the transceiver.
6. Using your fingers, grasp the body of the transceiver and pull it straight out of the port.
7. Place the transceiver in the electrostatic bag or on the antistatic mat placed on a flat, stable surface.
8. Place the dust cover over the empty port.
Figure 33: Removing a Transceiver from an NFX350 Device

Maintaining Fiber-Optic Cables on the NFX350

IN THIS SECTION

Maintaining Fiber-Optic Cables in an NFX350 Device | 104

Disconnecting a Fiber-Optic Cable from an NFX350 Device | 105
Connecting a Fiber-Optic Cable to an NFX350 Device | 106
Maintaining Fiber-Optic Cables in an NFX350 Device
To maintain fiber-optic cables in NFX350 devices:
To avoid electrostatic discharge (ESD) damage to the transceiver, do
104