Figure 34: Inserting a Fiber-Optic Cable into a Transceiver on an NFX350 Device
Removing the NFX350 Device from a Rack or Cabinet
IN THIS SECTION
Powering off an NFX350 Device | 108
Removing an NFX350 Device from a Rack or Cabinet | 110
Powering off an NFX350 Device
To power off the NFX350 device, follow the procedure in this topic.
Before you power off the switch:
Ensure that you understand how to prevent electrostatic discharge damage. See
Electrostatic Discharge Damage" on page
Ensure that you do not need to forward traffic through the device.
Ensure that you have the following parts and tools available to power off the switch:
An electrostatic discharge (ESD) grounding strap
An external management device such as a PC
A cable to connect the external management device to the console port (CON) or management port
(MGMT) on the device
To power off the device:
160.
"Prevention of
108