Nfx350 Hardware; System Software; Junos Os Releases Supported On Nfx Series Hardware - Juniper NFX350 Hardware Manual

NFX350 Hardware

The NFX350 portfolio consists of rack-mount models, with LTE support. The NFX350 device has a 1 U
form factor and comes with built-in fans and power supply.
The NFX350 device can be used as:
A SD-WAN solution.
A resilient uCPE platform.
An integrated branch router and switch, extensible with VNFs.
A CPE for service providers.
A secure router for distributed enterprises.

System Software

The NFX350 architecture integrates routing, switching, and security functions on a single platform that
optimizes the usage of system resources. The architecture enables unified management of all the
components through a single CLI. Key components in the NFX350 software include the Junos Control
Plane (JCP), Juniper Device Manager (JDM), Layer 2 dataplane, Layer 3 dataplane, and Virtual Network
Functions (VNFs). The JCP is the Junos virtual machine (VM) running on the host OS, Wind River Linux.
The JCP functions as the single point of management for all the components. The JCP CLI is displayed
when you log in to the NFX350 device.

Junos OS Releases Supported on NFX Series Hardware

The following table provides details of Junos OS software releases supported on the NFX Series platforms:
Table 3: Supported Junos OS Releases on NFX Series Devices
NFX Supported
Series Junos OS
Platform Release
NFX150 18.1R1 or
later
Software Package
nfx-3
jinstall-host-nfx-3-x86-64-<release-number>- secure-signed.tgz
install-media-host-usb-nfx-3-x86-64-<release-number>-secure.img
Software Downloads
Page
NFX150 Software
Download Page
19