Table of Contents
Advertisement
the front-mounting brackets with a hole in each rack rail, making sure the chassis is level. See
Figure 16 on page 70
Figure 16: Attaching the Device to the Rack
Figure 17: Mounting the Device on the Front Posts in a Rack
8. Have a second person secure the front of the device to the rack by using the appropriate screws for
your rack.
9. Slide the rear mounting-blades into the front-mounting brackets.
10. Attach the rear mounting-blades to the rear post by using the appropriate screws for your rack. Tighten
the screws.
11. Ensure that the device chassis is level by verifying that all the screws on the front of the rack are aligned
with the screws at the back of the rack. See
and
Figure 17 on page
70.
Figure 18 on page
71.
70
Advertisement
Table of Contents
