Table of Contents
Advertisement
To connect the power supply to a power source:
a. Secure the ring lug of the positive (+) DC power source cable to the A+ or B+ terminal on the DC
power supply.
b. Secure the ring lug of the negative (–) DC power source cable to the A– or B– terminal on the DC
power supply.
c. Tighten the screws on the power supply terminals until snug by using the screwdriver. Do not
overtighten—apply between 8 in.-lb (0.9 Nm) and 9 in.-lb (1.02 Nm) of torque to the screws.
To connect the power supply to two power sources:
a. Secure the ring lug of the positive (+) DC power source cable from the first DC power source to
the A+ terminal on the power supply.
b. Secure the ring lug of the negative (–) DC power source cable from the first DC power source to
the A– terminal on the power supply.
c. Secure the ring lug of the positive (+) DC power source cable from the second DC power source
to the B+ terminal on the power supply.
d. Secure the ring lug of the negative (–) DC power source cable from the second DC power source
to the B– terminal on the power supply.
e. Tighten the screws on the power supply terminals on both the power supplies until snug by using
the screwdriver. Do not overtighten—apply between 8 in.-lb (0.9 Nm) and 9 in.-lb (1.02 Nm) of
torque to the screws.
5. Hook the plastic cover on one side of the terminal block and gently flex it inward to hook it on the
other side also.
6. Close the input circuit breaker.
79
Advertisement
Table of Contents
