Table of Contents
Advertisement
root@# set access address-assignment pool junosDHCPPool family inet dhcp-attributes name-server
dns-server-ip
10. Commit the configuration.
[edit]
root@# commit
Establishing the Connection
1. Connect the device to the ISP by connecting one of the WAN ports (0/8 and 0/15) to the ISP. The
device is assigned an IP address by the ISP through DHCP.
NOTE:
For information about NFX350 interfaces, see
2. Connect the laptop to one of the front panel LAN ports (0/0 to 0/7). The laptop is assigned an IP address
by the DHCP server running on the device.
3. Open a browser window on your laptop, navigate to https://www.juniper.net, and verify your
connectivity.
Installing and Configuring the NFX350 Expansion
Modules
IN THIS SECTION
Installing the LTE Expansion Module | 87
Configuring the LTE Expansion Module | 88
Configuring the LTE Expansion Module for Primary Mode | 89
Configuring the LTE Expansion Module for Dial-on-Demand Mode | 90
Configuring the LTE Expansion Module for Backup Mode | 92
Upgrading the Modem Firmware on NFX Devices Through Over-the-Air (OTA) | 94
Table 36 on page
84.
86
Advertisement
Table of Contents
