Table of Contents
Advertisement
Unpacking an NFX350 Device
The NFX350 devices are shipped in a cardboard carton, secured with foam packing material. The carton
has an accessory compartment and contains the quick start instructions.
CAUTION:
not unpack the devices until you are ready to begin installation.
To unpack the device:
1. Open the carton.
2. Pull out the packing material holding the device in place.
3. Verify the parts received against the inventory on the label attached to the carton. See
(Packing List) for an NFX350 Device" on page
4. Save the shipping carton and packing materials in case you need to move or ship the device later.
SEE ALSO
NFX350 Network Services Platform Overview | 18
Parts Inventory (Packing List) for an NFX350 Device
The device shipment includes a packing list. Check the parts you receive in the device shipping carton
against the items on the packing list. The parts shipped depend on the configuration you order.
If any part on the packing list is missing, contact your customer service representative or contact Juniper
customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or
direct-dial options in countries without toll-free numbers, see
https://www.juniper.net/support/requesting-support.html.
Table 32 on page 66
lists the parts and their quantities in the packing list.
NFX350 devices are maximally protected inside the shipping carton. Do
65.
65
"Parts Inventory
Advertisement
Table of Contents
