Table of Contents
Advertisement
user@host# run request modem wireless create-profile profile-id profile-id cl-1/1/0 slot sim-slot-number
access-point-name apn-name authentication-method none
NOTE:
sim-slot-number is the slot on the module in which the SIM card is inserted.
4. Verify that the profile is configured successfully:
user@host# run show modem wireless profiles cl-1/1/0 slot 1
5. Activate the SIM card:
user@host# set interfaces cl-1/1/0 act-sim sim-slot-number
6. Select the profile and configure the radio access type for the SIM card:
user@host# set interfaces cl-1/1/0 cellular-options sim sim-slot-number select-profile profile-id
profile-id
user@host# set interfaces cl-1/1/0 cellular-options sim sim-slot-number radio-access automatic
NOTE:
If a SIM card is installed in the second slot, then select the profile and configure the
radio access type for the SIM card in the second slot as well.
7. Verify the status of the wireless network and dialer interface:
user@host# run show modem wireless network
user@host# run show interfaces dl0.0
Configuring the LTE Expansion Module for Dial-on-Demand Mode
When the LTE expansion module is configured as a primary interface, it can function either in always-on
mode or in dial-on-demand mode. In always-on mode, the interface remains connected to the network
whereas In dial-on-demand mode, the connection is established only when needed.
In dial-on-demand mode, the dialer interface is enabled only when network traffic configured as an
"interesting traffic" arrives on the network. Interesting traffic triggers or activates the wireless WAN
90
Advertisement
Table of Contents
