Table of Contents
Advertisement
NFX350 Installation Overview
To install and connect an NFX350 device:
1. Follow instructions in
2. Mount the device by following instructions appropriate for your site:
"Mounting an NFX350 Device on Four Posts in a Rack or Cabinet" on page 67
rack-mount kit).
3. Follow instructions in
4. Follow instructions in
5. Perform initial configuration of the device by following instructions in Initial Configuration on NFX350
Devices.
6. Set the device's management options by following the appropriate instructions:
Connecting an NFX350 Device to a Management Console on page 81
Connecting an NFX350 Device to a Network for Out-of-Band Management on page 80
Unpacking and Mounting the NFX350
IN THIS SECTION
Unpacking an NFX350 Device | 65
Parts Inventory (Packing List) for an NFX350 Device | 65
Registering Products—Mandatory for Validating SLAs | 66
Mounting an NFX350 Device | 67
Mounting an NFX350 Device on Four Posts in a Rack or Cabinet | 67
"Unpacking and Mounting the NFX350" on page
"Connecting Earth Ground to an NFX350 Device" on page
"Connecting AC Power to an NFX350 Device" on page
64.
(using the four-post
71.
73.
64
Advertisement
Table of Contents
