Table of Contents
Advertisement
8.4. Configure DNIS Mappings
The DNIS is the number that conference users dial to access a conference. To create and map a
DNIS to a conference type, navigate to Meeting Exchange Audio Conferencing Call
Routing. Select the relevant Meeting Exchange and select Configure (not shown).
In the Call Routing section on the right hand side click the Edit button beside Call Branding.
Click on the Add button and in the Call Branding Add Entry screen set the following:
DDI
Name
Organization Name Enter a suitable name
Ownership
Message Number
Message Set Number
On Entry
On Failure
Conference Room Start
Conference Room End
Click Save.
BD; Reviewed:
SPOC 02/26/2013
Set to telephone number to be assigned for SCAN conferences i.e.
23600
Set a descriptive name for the conference
Leave set to System
Set to 247 to prompt users to enter a Pin number
Leave set at 1
Set to Scan Call Flow
Set to Direct to Enter queue
Set to 0
Set to 0
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
83 of 103
DLG1010MXSM62CS
Advertisement
Table of Contents
