Administer Time Ranges; Administer Routing Policy - Avaya 1000E Application Notes

Notes present a sample configuration for connectivity between communications server using e1/pstn to connect to the dialogic img 1010 media gateway

Hide thumbs Also See for 1000E:

Table of Contents

7.7. Administer Time Ranges

Create a Time Range for LCR routing which defines policies will be active. To create a Time

Range, browse to Home  Elements  Routing  Time Ranges. Click New. Under Name

enter a suitable identified. Select which Days are to be included in the Range. Set a suitable

Start Time and End Time. This will be used in configuring the Dial Plan. In Session Manager,

a default policy (24/7) is available that would allow routing to occur anytime. This was used in

the example network.

To complete the routing configuration, a Routing Policy is created. Routing policies direct how

calls will be routed to a system. Two routing policies must be created, one to route calls to

Meeting Exchange and the second to route calls to Avaya Communication Server (CS1000E) via

the Dialogic IMG 1010. These are to be associated with the Dial Patterns which will be created

in the next step.

BD; Reviewed:

SPOC 02/26/2013

Solution & Interoperability Test Lab Application Notes

68 of 103

DLG1010MXSM62CS

Table of Contents

Cs1000e