5.3. Administer E1 Card
Select System Core Equipment Loops. To add a new Loop, click on the drop down
arrow, select 2.0 Mb/s Primary Rate Interface and click on the Add button.
In the new screen that opens enter the following:
PRI Loop Number
Media Gateway Card
Click Save to save the changes.
BD; Reviewed:
SPOC 02/26/2013
Enter the loop number i.e. 043 to represent where the
Media Gateway Card will be inserted in the relevant Shelf
and Slot. Alternatively enter a number between 0-255.
Enter the Shelf-Cabinet-Slot where the NTBK50AAE5 E1
2Mbps ISDN trunk card has been inserted into the Avaya
MG1000 Media Gateway. In this example the trunk card
has been inserted in slot 3.
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
15 of 103
DLG1010MXSM62CS