Channel Group (Isdn) - Avaya 1000E Application Notes

Notes present a sample configuration for connectivity between communications server using e1/pstn to connect to the dialogic img 1010 media gateway

Hide thumbs Also See for 1000E:

Table of Contents

6.9.1.1 Channel Group (ISDN)

Configure an ISDN Channel Group by selecting Configuration Avaya_Interop  Dialogic

IMG EMS  Routing Configuration  Channel Groups. Right click on Channel Groups

and select New Channel Groups. Select the following parameters, leaving the remaining

parameters at their default values.

Name

Signaling Type

Route Table

To save the changes right click on the newly created Channel Group and select Commit (not

shown).

Note: The administration for the Route Table and Translation Table fields are displayed in this

screen, although the tables have not yet been created. When providing the IMG with an initial

configuration, create a Channel Group first, then create a Route Table and optional

Translation Table, then edit the Channel Group to include these tables. This note applies to all

channel groups.

BD; Reviewed:

SPOC 02/26/2013

A descriptive name i.e. CS1K

Select ISDN

Select RT_Entry1-ID:5 (to be configured in

Section 6.9.2.1.)

Solution & Interoperability Test Lab Application Notes

51 of 103

DLG1010MXSM62CS

Table of Contents

Cs1000e