Configure Sip Listener - Avaya 1000E Application Notes

Notes present a sample configuration for connectivity between communications server using e1/pstn to connect to the dialogic img 1010 media gateway

Hide thumbs Also See for 1000E:

Table of Contents

8.2. Configure SIP Listener

The SIP signaling messages in the sample configuration are transmitted between the Avaya

Meeting Exchange and the SIP interface of the Session Manager over a TCP channel. Configure

the following settings to enable SIP Connectivity on the Meeting Exchange server.

In System Manager navigate to Meeting Exchange  Media  Configuration. Select the

Meeting Exchange to be configured (tick the box) and then click on the Configure button.

The next stage is to set the SIP Listener and Response contact to recognize the IP address of the

Meeting Exchange and set the transport protocol (TCP) and port number to be used. Expand the

section labeled SIP and configure the following:

SIP Listener URI

Response Contact

Click Save.

The extension ―6000‖ is the default extension number the Meeting Exchange is installed with.

This can be changed to a more suitable number if desired.

BD; Reviewed:

SPOC 02/26/2013

Set to sip:6000@10.10.6.150:5060;transport=tcp

Solution & Interoperability Test Lab Application Notes

80 of 103

DLG1010MXSM62CS

Table of Contents

Cs1000e