6.5.1. Network Interface VoIP Module
Create a Network Interface corresponding to the VoIP Module 0:Port 0 by selecting
Configuration Avaya_Interop Dialogic IMG EMS Logical IMG IMG Group 1
IMG Name AvayaInterop-ID:0 IP Network. Right click on IP Network and select New IP
Address. Select the following parameters, leaving the remaining parameters at default values.
Physical Interface
Logical Interface
Address Type
IP Address
Subnet
Default Gateway
To save the changes, right click VoIP Module 0 – Data and select Commit (not shown).
BD; Reviewed:
SPOC 02/26/2013
Select VoIP Module 0
Select Data
Select IP V4
0d:10.10.9.86 (IP address assigned to physical interface
DATA 0)
255.255.255.0
10.10.9.1
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
39 of 103
DLG1010MXSM62CS