Table of Contents
Advertisement
At this stage, the screen may look similar to the one below, however the status of the loop may
show as disabled. At this stage, the status of disabled is normal as further configuration is
required before the trunk card can be enabled for service.
5.4. Administer D-Channel
The next step is to administer a D-Channel. Navigate to Routes and Trunks D-Channels.
From the drop down for Choose a D-Channel Number selecting an appropriate number from
the list and set type to DCH. In the example below, the D-Channel number chosen matches the
loop number created in Step 5.3 for programming purposes. Click on the Add button to begin the
creation of the D-Channel.
BD; Reviewed:
SPOC 02/26/2013
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
16 of 103
DLG1010MXSM62CS
Advertisement
Table of Contents
