Table of Contents
Advertisement
the Mitel location. Navigate to Home Elements Routing Locations. To create a new
Location, click New.
In the General section,
Name Add a descriptive name.
Notes add a brief description.
Leave the settings for Overall Managed Bandwidth and Pre-Call Bandwidth Parameters, as
default unless advised to do otherwise.
Continue scrolling down the screen until Location Pattern is displayed as shown below. In the
Location Pattern section, under IP Address Pattern enter IP addresses used to logically
identify the location(s). Under Notes add a brief description. Click Commit to save.
In the example above, IP addresses have been entered with a (*) wildcard to indicate a range.
7.4. Administer Adaptations
Adaptations are used to manipulate digits in the SIP URI strings of incoming and outgoing calls.
For this sample configuration, no adaption is required to reformat the uri string or to perform a
digit conversion.
BD; Reviewed:
SPOC 02/26/2013
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
62 of 103
DLG1010MXSM62CS
Advertisement
Table of Contents
