Configuration Tools - Avaya 1000E Application Notes

Notes present a sample configuration for connectivity between communications server using e1/pstn to connect to the dialogic img 1010 media gateway

Hide thumbs Also See for 1000E:

Table of Contents

4.1. Configuration Tools

Avaya Communication Server 1000E (CS1K) was configured via UCM Element Manager –

which can be accessed via Avaya Aura System Manager if using Single Sign On. Alternatively,

the Element Manager GUI can be accessed directly via the ELAN IP Address. Additional

configuration was carried out using PuTTY to access the relevant ―Overlays‖ via the CLI

console screen.

Dialogic IMG 1010 Media Gateway was configured via IMG Client View software. This was

accessed by using VNC Viewer to connect to the GCEMS server and running the IMG Client

software installed on the Linux server. For later versions, a Windows based IMG ClientView

software package is available.

Avaya Aura Session Manager and Avaya Meeting Exchange were configured via Avaya Aura

System Manager. Configuration of Meeting Exchange is also possible via a PuTTY session.

Avaya Bridge Talk was used to configure the conference settings for SCAN, FLEX and

DIRECT.

This document has assumed the following:

All relevant IP equipment has been installed and licensed and introduced to the IP LAN

Endpoints on CS1000E have been configured and are capable of dialing one another.

Endpoints on the Avaya Aura Communication Manager and Avaya Aura Session

Manager have been configured and can dial each other.

Users have a basic familiarity with PuTTY and the web GUI interfaces for both Avaya

Communication Server 1000E (CS1000E), Avaya Aura System Manager and Avaya

Aura Meeting Exchange.

BD; Reviewed:

SPOC 02/26/2013

Solution & Interoperability Test Lab Application Notes

11 of 103

DLG1010MXSM62CS

Table of Contents

Cs1000e