6.7.1. SIP Signaling
Configure SIP Signaling by selecting Configuration Avaya_Interop Dialogic IMG EMS
Logical IMG IMG Group 1 IMG Name AvayaInterop-ID:0 Signaling. Right click
on Signaling and select New SIP. Administer the settings in the configuration pane that enable
SIP connectivity between the IMG and other SIP User Agents. Set the following parameters,
leaving the remaining fields at default values.
SIP signaling IP Address
Local SIP Port
Default transport Type
Remote IMG's SIP Profile
Network IP Address
To save the changes right click SIP Signaling and select Commit (not shown).
BD; Reviewed:
SPOC 02/26/2013
0d:192.168.81.180 (from Section 6.5.2)
Select 5060
Select TCP
Select SIP: default – ID:0 (from Section 6.3.1)
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
0d:10.10.9.86 (populated from the configuration
provided for the VoIP module in Section 6.5.1)
45 of 103
DLG1010MXSM62CS