Voip Facilities - Avaya 1000E Application Notes

Notes present a sample configuration for connectivity between communications server using e1/pstn to connect to the dialogic img 1010 media gateway

Hide thumbs Also See for 1000E:

Table of Contents

6.6.2. VoIP Facilities

Configure VoIP Facilities by selecting Configuration Avaya_Interop  Dialogic IMG EMS

Logical IMG IMG Group 1  IMG Name AvayaInterop-ID:0  Facility. Right click on

Facility and select New Bearer – IP. In the configuration pane on the right select the following

parameters, leaving the others at default values.

Module ID

Network Interface

Network IP Address

To save the changes, right click VoIP Resource 0 and select Commit.

BD; Reviewed:

SPOC 02/26/2013

Will usually default to 0 if it is the first one

Will default to VoIP Module 0 in relation to the Module

0d:10.10.9.86 (populated from the configuration provided

for the VoIP module in Section 6.5.1)

Solution & Interoperability Test Lab Application Notes

43 of 103

DLG1010MXSM62CS

Table of Contents

Cs1000e