Table of Contents
Advertisement
keyboard, followed by the return key. The output from the Avaya Communication Server 1000E
command line interface has been trimmed down in the subsequent sections in order to focus on
key settings for the configuration. Values in bold represent values entered by the system
administrator.
Command
OVL111 IDLE 0
>LOGI
USERID? admin
PASS?XXXXXX
TTY #04 LOGGED IN ADMIN 18:26
3/10/2012
OVL000
>LD 96
.enl MSDL 4 0 3 FDL
5.9. Enable D-channel Automatic Establishment
Use the command line interface to enable automatic establishment for the administered D-
channel.
Command
>LD 96
.enl auto 43
5.10. Backing up the changes to CS1000E
Changes may be backed up to the CS1000E either via Element Manager or via the CLI console
screen.
For Element Manager initiated backup navigate in Element Manager to Tools Backup
and Restore Call Server. Click on Backup.
For backup via the CLI console enter LD 46 and type EDD and press return.
Both methods take a few minutes.
BD; Reviewed:
SPOC 02/26/2013
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
Comment
Issue the login command
Enter a valid User ID
Enter a valid user password
Use load 96 to enable the E1 card
Enable the E1 card with the physical slot
number of the card and the option FDL to
force parametric downloads. Please note the
dot before enl.
Comment
Use load 96 to enable automatic establishment
for the D-channel. In this case D-channel 43 is
being enabled.
Please wait a few minutes to ensure the
channels have come up.
28 of 103
DLG1010MXSM62CS
Advertisement
Table of Contents
