Table of Contents
Advertisement
6.9.1.2 Channel Group (SIP)
Configure a Channel Group corresponding to each External Gateway by selecting
Configuration Avaya_Interop Dialogic IMG EMS Routing Configuration Channel
Groups. Right click Channel Groups and select New Channel Group. Select the following
parameters, leaving the remaining parameters at their default values.
Name
Signaling Type
Route Table
To save the changes right click on the newly created Channel Group and select Commit (not
shown).
BD; Reviewed:
SPOC 02/26/2013
A descriptive name i.e. CS1K
Select SIP
Select RT_Entry2-ID:6 (to be configured in
Section 6.9.2.1)
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
55 of 103
DLG1010MXSM62CS
Advertisement
Table of Contents
