6.3.3. IP Bearer Profiles
Configure an IP Bearer Profile corresponding to Session Manager by right clicking Profiles and
select New IP Bearer Profile. Select the following parameters, leaving the remaining
parameters at default.
IP Bearer Profile Name
Silence Suppression
Echo Cancellation
Digit Relay
Digit Relay Packet Type
To save the changes right click on Bearer:Default IP Profile – ID-1 and select Commit not
shown).
BD; Reviewed:
SPOC 02/26/2013
Set as required
Select Disable
Select Enabled (NLP Enabled)
Select DTMF Packetized
Select 101
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
34 of 103
DLG1010MXSM62CS