6.9.2. Routing
Create an object for Routing Tables by selecting Configuration Avaya_Interop Dialogic
IMG EMS Routing Configuration. Right click Routing Configuration and select New
Service Routing Tables. To save the changes right click on the newly created Routing Tables
and select Commit (not shown).
6.9.2.1 Route Entry
Add two route entries to the Routing Table to route all calls from the inbound channel group on
the IMG to the outbound channel group by selecting Configuration Avaya_Interop Dialogic
IMG EMS Routing Configuration Routing Tables. Right click the Routing Tables and
select Add Route Entry. Select the following parameters, leaving the reaming parameters at
their default values.
Name
ID
To save the changes, right click RT_for_CS1K – ID:5 and select Commit.
BD; Reviewed:
SPOC 02/26/2013
A descriptive name i.e. RT_for_CS1K
Select an available ID i.e. 5
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
57 of 103
DLG1010MXSM62CS