Once complete, scroll down the screen and expand the section General Options
General Options
Configure the following options:
Data Selection (DSEL)
Trunk Access Restriction Group (TARG)
Search Method for Outgoing trunk member (SRCH)
Once these fields have been configured, scroll down and select the Submit button to commit the
changes.
Once the changes have been committed, the next step is to add Trunks to the route. To Add
trunks, click on the Add Trunks button beside the Route.
Trunks may be added one at a time or in multiples. In the following example, 30 trunks will
added to the route through a single screen configuration. In the Basic configuration area for
trunk configuration, enter the following:
BD; Reviewed:
SPOC 02/26/2013
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
Set to VOD
Set to 01
Set to LIN
DLG1010MXSM62CS
21 of 103