Create Ds1 Profile - Avaya 1000E Application Notes

Notes present a sample configuration for connectivity between communications server using e1/pstn to connect to the dialogic img 1010 media gateway

Hide thumbs Also See for 1000E:

Table of Contents

6.3.2. Create DS1 Profile

Configure the E1 Physical Span by right clicking Profiles and select New E1 Profile. Set the

following parameters to correspond accordingly with the connection to the CS1000E, leaving the

remaining parameters at default. One profile may be used for many DS1 spans if required).

Name Set as required

Coding Method

Enable CRC4

Enable FEBE

Signaling Method

Layer 1 Management

Transmit All Zeros

To save the changes right click on E1 Prof:DefaultE1 and select Commit (not shown).

BD; Reviewed:

SPOC 02/26/2013

Select HDB3

Select False

Select Clear Channel, used for ISDN-PRI & SS7 spans

Select E1 Layer 1 Mgmt

Select False

Solution & Interoperability Test Lab Application Notes

33 of 103

DLG1010MXSM62CS

Table of Contents

Cs1000e