Download Print this page

New Ip Codec In Bearer Profile - Avaya 1000E Application Notes

Notes present a sample configuration for connectivity between communications server using e1/pstn to connect to the dialogic img 1010 media gateway

Hide thumbs Also See for 1000E:

Table of Contents

6.3.3.1 New IP Codec in Bearer Profile

Assign one or more codecs to the IP bearer by selecting Configuration Avaya_Interop 

Dialogic IMG EMS  Profiles  Bearer:Default IP Profile–ID:1. Right click the IP Bearer

Profile in the Configuration tree and select New Supported Vocoders. Select the following

Parameters, leaving the meaning parameters at default values.

Payload Type

To save the changes, right click Priofile:1 Entry:0 and select Commit (not shown). The

screenshot shot shows the new vocoder created underneath the Bearer.

BD; Reviewed:

SPOC 02/26/2013

Select G711 alaw

Solution & Interoperability Test Lab Application Notes

35 of 103

DLG1010MXSM62CS

Table of Contents

Cs1000e