Delta AS Series Operation Manual page 318

A S S e r i e s O p e r a t i o n M a n u a l

For AS200, the hardware status page looks like below.
Refresh cycle
"-"
"+"
Power module name
CPU module name
CPU Run LED
CPU Error LED
CPU Error code
"Run" / "Stop"
Function card name
_9
Module name
Module Error LED
Module Error code
9 - 11 0
Item
Refresh cycle time; default: 10; unit: second
Minus; click once to decrease 1; the minimum value is 1
Plus; click once to increase 1; the maximum value is 60
Name of the power module; read only
Name of the CPU module; read only
LED of CPU running status; read only
Green light: RUN
LED Not Lit: STOP
LED of CPU Error; read only
Error codes of CPU module; read only
Click "RUN" to set the running status to RUN
Click "Stop" to set the running status to STOP

or READ, this column is read only.
Name of the function card; read only

of the communication function cards are shown here
Name of the module; read only
When the actual placement is not the same as the arrangement
in HWCONFIG, the background of this column will be in red.
LED of module error; read only
Error codes of module; read only
Description
If the authority level for the logged in user is WRITE/READ
For communication module, two extra rows for the names