A S S e r i e s O p e r a t i o n M a n u a l
3.
Set up the IP address
Double-click the listed MAC address for your device to open the Input Data dialog box.
Enter the IP address and click OK.
4.
Disable DHCP/BOOTP
Click the device in the Mapping Table that you want to disable, then click Disable DHCP/BOOTP. The selected
device does not send DHCP/BOOTP requests. To change the IP address receiving mode, refer to Section 9.4.2.4
for more information.
_9
9 - 2 0