Delta AS Series Operation Manual page 254

A S S e r i e s O p e r a t i o n M a n u a l
3. Right click in the EtherNet/IP Table (Consumed Tag) window and then click Add a Symbol.
4. In the Add Symbol dialog box, enter the required information in the table to create a consumed tag.
5. You can use tags in the data mapping. Refer to Section 9.4.4 for more information.

Descriptions for the Add Symbol dialog box
1
Number

Identifier

Address
_9

Type

Initial Value

Comment
9 - 4 6
2
Name
Create Tags for a PLC; up to 40 characters.
Correspond to registers or bytes in a PLC; you can use a data register or M bit
device.
Supports data types such as BOOL, WORD, DWORD, INT, DINT, REAL, and
ARRAY (one-dimensional array linear array, up to 512 bytes).
Not supported
Description for the TAG; up to 128 characters.
3 4
Description
5