Delta AS Series Operation Manual page 245


Use TAG function in data mapping
a) Create a General Device in the Network View as shown below and then set the IP address to be used
as a Produced TAG. For adding a device, please refer to Section 9.4.3.
b) Start or switch to the data mapping page.
c) Once you select the TAG check box, the directional arrow is to the left with () (READ only)
C h a p t e r 9 E t h e r n e t S p e c i f i c a t i o n a n d O p e r a t i o n
9_
9 - 3 7