Delta AS Series Operation Manual page 242

A S S e r i e s O p e r a t i o n M a n u a l

I/O Mapping Table
Delta EIP devices provide an I/O mapping table. You can use the table to edit the parameters if needed.

Connection

In

Out

Name

Value
_9
9 - 3 4
Name
Select the connection from the list. Different connections may have
different mapping parameters.
Input mapping parameters. The No. column shows the maximum
number of mapping parameters to input. Double-click the Name
column to open the mapping table to edit the parameters.
Output mapping parameters. The No. column states the maximum
number of mapping parameters to output. Double-click the Name
column to open the mapping table to edit.
The parameter name; double-click the Name column to open the
mapping table to edit the parameters.
Values; after editing and downloading, the scanner stores the
values. When the connection is established, the values are written
to the Adapter.
Definition