Delta AS Series Operation Manual page 201

b. If you select PC (DUP File), click
and type a filename in the File name box. When you select the backup source for the ISPSoft
Project, set the PLC password. You can set the password to be the same as the Project password,
set a new PLC password, or not set a PLC password. If you do not set a password for the Project,
the PLC password is also not set. When you select Setting new PLC password, the wizard looks
like the following image. And you can set new PLC password and number of the attempt times.
(5) After that you can see the summary. Make sure that the summary in the CARD Utility wizard is consistent
with the data backup you want to perform, and then click Execute.
, select a folder in the Save in list in the Save As dialog box,
C h a p t e r 7 M e m o r y C a r d
7 - 11
7_