Delta AS Series Operation Manual page 243

Hide thumbs Also See for AS Series:

Table of Contents

Requested Packet Interval (RPI)

Trigger Mode

Input Instance

Output Instance

Configure Instance

C h a p t e r 9 E t h e r n e t S p e c i f i c a t i o n a n d O p e r a t i o n

Time interval to request packets through the I/O connection, unit: ms

Communication mode setup: Multicast or Point-to-Point

Sets the timeout according to the RPI or a multiple of RPI (RPI*X).

The minimum value is 100 ms to reduce timeout occurrence When a

value that is less than 100 ms is treated as 100 ms.

Cyclic: renews data cyclically

Change of State: renews data once there is any change

Application: renews data according to the product setup

You can edit input instance, output instance and configure instance

in some of the EDS files. The instance number is the same as the

data mapping connection number. You can tell the mapped data is

from which corresponding device by the instance number.

Show Quick Links

Chapters

Table of Contents