Delta AS Series Operation Manual page 169

To select several networks, press and hold the Ctrl key on the keyboard and click the networks. You can also
select a range of networks by pressing and holding Shift on the keyboard, clicking the first network within the
range, and then clicking the last network within the range.
Right-click an object after selecting it to show the context menu.
Item
Undo the last action.
Undo
You can undo up to 20 previous actions.
Redo You can redo an action that has been undone.
Cut Cut a device, block, or network.
Copy Copy a device, block, or network.
Paste Paste an object that has been copied or cut into the present position.
Paste an object at the right side of the selected position.
Paste right
The object is connected in series to the selected position.
Paste an object under the selected position.
Paste under
The object is connected in parallel to the selected position.
Delete Delete a device, block, or network.
Activate or deactivate the selected network.
Activate/Inactivate
Network
The deactivated network is ignored when you compile the program.
C h a p t e r 6 W r i t i n g a P r o g r a m
Function
6_
6 - 1 5