Table of Contents
Advertisement
15. Plug in all peripheral devices and AC power.
16. Restart the server.
Replacing the software feature key
If you upgrade your system or convert it to high capacity, you must replace the software feature
key with a new key.
To replace the software feature key
1. Remove the new software feature key from the plastic bag.
2. Eject the old software feature key by inserting a straightened paper clip into the side
3. Push the paper clip in the direction of the software feature key.
4. Insert the new software feature key into the software feature slot on the dongle with
Figure 27: Dongle with open slot
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
access hole.
the data contact facing down and away from the embossed i.
In the following figure, label 1 is the data contact and label 2 is the ground.
Replacing the software feature key
December 2010
87
Advertisement
Table of Contents
