Replacing basic chassis components
Figure 19: DS30X cables for high capacity
6. Disconnect the SCSI cable attached to the RAID card.
Figure 20: SCSI cable attached to RAID card
7. Lift the blue tabs and pull up on the riser to remove the riser card assembly from
80
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Important:
If you have the high capacity configuration with three MPB96 boards, label each
cable with the MPB96 slot number before disconnecting them. Incorrectly
connected MPB96 boards do not answer calls.
the chassis.
December 2010