Avaya CallPilot 1005r Maintenance And Diagnostics page 82

Replacing basic chassis components
Figure 23: PCI riser assembly power cord
14. Hold the PCI riser assembly by the two blue handles (A) and push the assembly
15. Line up the two grooves on the back lip of the PCI riser assembly with the pins on
82 Avaya CallPilot® 1005r Server Maintenance and Diagnostics
into the server board. Refer to
the rear panel as shown in the following illustration.
Important:
If the PCI riser assembly is not fully seated, the server can malfunction.
Figure 21: PCI riser card assembly on page 81.
December 2010