RAID operations
Figure 32: PCI riser card assembly
8. Turn the riser card upside down and place it on a table.
Figure 33: Low-riser PCI card
9. Release the retention bar (A).
10. Replace the card (B).
11. Lock the retention bar in place.
12. Turn the PCI riser card right-side up and place it on a table.
13. Arrange the PCI riser assembly red power cable as shown in the following
100
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
illustration to avoid pinching the cable when you put the riser assembly into the
chassis.
December 2010