Table of Contents
Advertisement
Figure 30: DS30X cables for high capacity
6. Disconnect the SCSI cable from the RAID card.
Figure 31: SCSI cable to RAID card
7. Lift the blue tabs and pull up on the riser to remove the riser card assembly from
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Important:
If you have the high capacity configuration with three MPB96 boards, label each
cable with the MPB96 slot number before disconnecting them. Incorrectly
connected MPB96 boards do not answer calls. If you have an NTRH40CA
MPB96 board, label each DS30 cable according to its RJ-45 connector.
the chassis.
Requirements
December 2010
99
Advertisement
Table of Contents
