Avaya CallPilot 1005r Maintenance And Diagnostics page 71

Blue tab
Green tab
Black tab
To remove the server cover
1.
2. Turn off all peripheral devices connected to the server.
3. Attach the ESD strap to your wrist and attach the other end to a known grounded
4. While holding the blue button at the top of the chassis in, slide the top cover back
Figure 12: Server cover
5. Lift the cover straight up to remove it from the platform.
Avaya CallPilot® 1005r Server Maintenance and Diagnostics
Power down the server before replacing it.
It can be replaced while the server is powered on.
It is non-replaceable, or not important.
Voltage:
Risk of electric shock
High current inside the chassis can cause severe injury.
Caution:
Risk of equipment damage
Take precautions to protect internal components. Electrostatic discharge (ESD)
can damage boards and make them unusable.
Power down the server, unplug all peripheral devices and Ethernet cables, and
disconnect the AC power.
connection.
until it stops.
Removing and replacing the server cover
December 2010 71