Tie-Bd (Tie Trunk Circuit Pack) - Avaya Definity SI Maintenance Manual

Maintenance Object Repair Procedures

TIE-BD (Tie Trunk Circuit Pack)

MO Name (in
Alarm Log)
TIE-BD
TIE-BD
1 Where P is the port network number (1 for PPN and 2 or 3 for EPN); C is the carrier
designation (for example, A, B, C, D, or E); and SS is the address of the slot in the
carrier where the circuit pack is located (for example, 01, 02, ..., etc.).
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also TIE-TRK (Tie Trunk).
10-1736 Issue 4 May 2002
Alarm Initial Command to
Level Run
MIN test board PCSS sh
WRN test board PCSS sh
1
Full Name of MO
Tie Trunk Circuit Pack
Tie Trunk Circuit Pack
555-233-123