Kyocera TASKalfa 3050ci Service Manual page 86

9. Pass the vender wire through the aper-
ture in the IF mount.
10. Secure the vender wire with two screws
removed in step 6.
11. Secure the ground terminal of the
vender wire to rear frame with the
screw.
12. Connect the connector of the vender
wire to connector of the vender signal
cable.
13. Refit the rear lower and upper covers.
14. Connect the signal cable of coin vender
to connector of the vender wire.
Vender
signal cable
IF mount
Figure 1-2-82
Vender wire
Figure 1-2-83
1-2-62
2LK/2LN/2LM/2LC-2
Ground
terminal
Screw
Ground terminal
Screw
Screws
Vender wire
Signal cable of
coin vender