Kyocera TASKalfa 3050ci Service Manual page 228

Item No.
U247 Method: [LCF/Side LCF]
1. Press [Motor] or [Device] and select the item.
Motor
Device
2. Select [Execute].
3. Press the start key. The operation starts.
4. To stop operation, press the stop key.
Method: [Side Deck]
1. Press [Motor] or [Device] and select the item.
Motor
Device
2. Select [Execute].
3. Press the start key. The operation starts.
4. To stop operation, press the stop key.
Method: [SMT]
1. Press [Motor] or [Device] and select the item.
Motor
Device
2. Select [Execute].
3. Press the start key. The operation starts.
4. To stop operation, press the stop key.
Display
Off
On
C1 Clutch
C2 Clutch
V Feed Clutch
H Feed1 Clutch
H Feed2 Clutch
Cassette1 Solenoid
Cassette2 Solenoid
Display
Off
On
C1 Clutch
Cassette1 Solenoid
Display
Off
On
C1 Clutch
Feed1 Clutch
Feed2 Clutch
Feed3 Clutch
Cassette1 Solenoid
Separator Solenoid
Description
Description
PF paper feed motor (PFPFM) is turned off
PF paper feed motor (PFPFM) is turned on
PF paper conveying clutch 1 (PFPCCL1) is turned on
PF paper conveying clutch 2 (PFPCCL2) is turned on
PF paper conveying clutch 3 (PFPCCL3) is turned on
PF paper feed clutch 1 (PFPFCL1) is turned on
PF paper feed clutch 2 (PFPFCL2) is turned on
PF pickup solenoid 1 (PFPUSOL1) is turned on
PF pickup solenoid 2 (PFPUSOL2) is turned on
Description
SF paper feed motor (SFPFM) is turned off
SF paper feed motor (SFPFM) is turned on
SF paper conveying clutch (SFPCCL) is turned on
SF pickup solenoid (PFPUSOL) is turned on
Description
SM paper feed motor (SMPFM) is turned off
SM paper feed motor (SMPFM) is turned on
SM paper conveying clutch 1 (SMPCCL1) is turned on
SM paper conveying clutch 2 (SMPCCL2) is turned on
SM paper conveying clutch 3 (SMPCCL3) is turned on
SM paper conveying clutch 4 (SMPCCL4) is turned on
SM pickup solenoid (SMPUSOL) is turned on
SM feedshift solenoid (SMFSSOL) is turned on
1-3-134
2LK/2LN/2LM/2LC-2