Kyocera TASKalfa 3050ci Service Manual page 434

11. Remove the pickup MPF shaft from the
axis holes of feed MPF holder.
12. Pull the pickup gear Z30R and MP for-
warding pulley out from the pickup MFP
shaft.
Detaching the MP separation pulley
13. Unhook two hooks and then remove the
middle guide.
MP forwarding pulley
Pickup gear Z30R
Feed gear Z26H
Axis hole
Middle guide
1-5-16
2LK/2LN/2LM/2LC
Pickup MFP shaft
Axis hole
Feed MPF holder
Figure 1-5-26
Hook
Figure 1-5-27
Hook