Code
Contents
2600
PF paper feed motor error
(large capacity feeder)
After PF paper feed motor is
driven, the ready signal does
not turn to L within 2 s.
2610
PF paper feed motor error
(paper feeder)
After PF paper feed motor is
driven, the ready signal does
not turn to L within 2 s.
2640
SD paper feed motor error
(side deck)
After SD paper feed motor is
driven, the ready signal does
not turn to L within 2 s.
Causes
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector.
PF paper feed motor and PF main PWB
(YC16)
Defective drive
Check if the gears rotate smoothly. If not,
transmission sys-
grease the bushes and gears. Check for
tem of motor.
broken gears and replace if any.
Defective PF paper
Replace the PF paper feed motor.
feed motor.
Defective PF main
Replace the PF main PWB (Refer to the ser-
PWB.
vice manual for the paper feeder).
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector.
PF paper feed motor and PF main PWB
(YC16)
Defective drive
Check if the gears rotate smoothly. If not,
transmission sys-
grease the bushes and gears. Check for
tem of motor.
broken gears and replace if any.
Defective PF paper
Replace the PF paper feed motor.
feed motor.
Defective PF main
Replace the PF main PWB (Refer to the ser-
PWB.
vice manual for the paper feeder).
Defective connec-
Reinsert the connector. Also check for conti-
tor cable or poor
nuity within the connector cable. If none,
contact in the con-
replace the cable.
nector.
SD paper feed motor and SD main PWB
(YC16)
Defective drive
Check if the gears rotate smoothly. If not,
transmission sys-
grease the bushes and gears. Check for
tem of motor.
broken gears and replace if any.
Defective SD
Replace the SD paper feed motor.
paper feed motor.
Defective SD main
Replace the SD main PWB (Refer to the ser-
PWB.
vice manual for the paper feeder).
1-4-42
2LK/2LN/2LM/2LC-2
Check procedures/
corrective measures