Kyocera TASKalfa 3050ci Service Manual page 203

Item No.
U203 Checking DP operation
Description
Simulates the original conveying operation separately in the DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the speed to be operated.
Normal Speed
High Speed
4. Select the item to be operated.
CCD ADP (Non-P)
CCD ADP
CCD RADP (Non-P)
CCD RADP
CIS (Non-P)
CIS
5. Press the start key. The operation starts.
6. To stop continuous operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Normal reading (600 dpi)
High-speed reading
Display
Without paper, single-sided original of CCD
(continuous operation)
With paper, single-sided original of CCD
Without paper, double-sided original of CCD
(continuous operation)
With paper, double-sided original of CCD
Without paper, double-sided original of CIS
(continuous operation)
With paper, double-sided original of CIS
Description
Description
Description
1-3-109
2LK/2LN/2LM/2LC