Kyocera TASKalfa 3050ci Service Manual page 490

11. Release wire saddles.
30ppm model/35ppm model: 1
45ppm model/55ppm model: 2
12. Remove connectors.
30ppm model/35ppm model: 1
45ppm model/55ppm model: 3
13. Remove five screws and then remove
the drum drive unit MCY.
*: Do not have a shaft part alone when
you carry drum drive unit MCY. (Have
the housing.)
*: Put support on the tip of the shaft so
that the shaft may become the horizon-
tal when you put drum drive unit MCY
on the table etc.
14. Check or replace the drum drive unit K
and the drum drive unit MCY and refit
all the removed parts.
Connector*
Wire saddle*
Connector
Wire saddle
*: 45 ppm model/55 ppm model only.
Figure 1-5-117
(Shaft portion)
Screw
Screw
Screw
Screw
Figure 1-5-118
1-5-72
2LK/2LN/2LM/2LC-2
Connector*
(Shaft portion)
Drum drive
unit MCY
(housing portion)
Screw
Screws
[45 ppm/
Screw
Screws
[30 ppm/
55 ppm]
35 ppm]